FIREX®-II TECK90 (XLPE) 600 V
Nexans FIREX®-II TECK90 Cables are intended for use in various primary and secondary industries, including chemical processing plants, refineries and general factory environments.
StandardsNational : CSA C22.2 N° 131; CSA C22.2 N° 239
Even in the most demanding industrial and resource industry applications, Nexans FIREX®-II TECK90 cables have proven to have a superior service and maintenance record.
FIREX®-II TECK90 Cables utilize low acid gas, low flame spread PVC jacket compounds to ensure maximum safety to personnel and equipment in the event of fire.
FIREX®-II TECK90 Cables, originally developed for use in Canadian mines, are flexible, resistant to mechanical abuse, corrosion resistant, compact and reliable. They are suitable for a wide range of applications, including ALL hazardous locations.
Industries such as pulp and paper, chemical, petroleum and other primary and secondary manufacturing industries have used FIREX®-II TECK90 Cables, particularly in areas
where cables are subject to the risk of mechanical damage and chemical attack.
Commercial applications for FIREX®-II TECK90 Cables include apartment buildings and commercial complexes.
FIREX®-II TECK90 Cables can be relocated easily because they are rugged and flexible. They can be used in both dry and wet locations in open wiring, in ventilated, non-ventilated and ladder-type cable troughs, in ventilated flexible cableways, and for direct burial.
TECK90 Cables are also suitable for service entrance installations - above and below ground.
Nexans FIREX®-II TECK90 Cables are:
- Available from stock
- Resistant to Mechanical Abuse and Corrosion
- Compact and Reliable
- "HL" and "FT4" Rated per CSA
- 90°C to -40°C
- Low Acid Gas (AG14)
- Inner and outer jackets are sunlight resistant
- LEAD FREE
- RoHS compliant
Marking and Identification
The inner jackets of Nexans FIREX®-II TECK90 cables are printed: SUN RES.
The outer jackets of Nexans FIREX®-II TECK90 cables are printed: (mon/year) NEXANS FIREX®-II TECK90 XLPE (-40°C) CSA LL19376 F HL FT4 AG14 SUN RES along with conductor size, number of conductors and sequential metre marking.
|Maximum operating voltage||600V|
|Maximum operating temperature||90°C|
Products and services
Docs and info
In case of fire, well maintained early warning smoke detectors will give an alarm long before non-metallic coverings become combustible.However, in spite of the widespread and long-standing use of PVC in residential and commercial buildings, all purchasers of PVC insulated/ jacketed products should be aware of the following:
- Non-metallic coverings of electrical cables can burn and may transmit fire when ignited.
- Burning non-metallic coverings may emit acid gases which are toxic and may generate dense smoke.
- Emission of acid gases may corrode metal in the vicinity; e.g. sensitive instruments and reinforcing rods in cement.