About Nexans
Products and Solutions
Customer Service
Work at Nexans
News and Press
ACP cables are used where a compact cable is needed and terminations may be made in the field. The 3.0 mm diameter tube is the same size as our standard loose tube flame retardant cable (see Adventum), but the tube also contains aramid to provided additional strength to the termination. These cables have been thoroughly tested in accordance with Telcordia GR-409, ICEA-596, and TIA/EIA-568.C.3 standards where applicable.
Buffer Tube Construction
Color coded loose tubes containing up to 12, 250 µm, individually colored fibers and aramid yarn.
Applications
Berk-Tek's ACP, plenum rated fiber optic cable is intended for all high speed data applications, including:
Features
Benefits
Fiber Type
ISO-TIAStandard
Effective ModalBW @ 850 nm
Overfilled LaunchBW @ 850 nm
Attenuation@ 850 nm
Attenuation@ 1300 nm
Attenuation@ 1550 nm
Sheath Color
AB
OS2
NS
0.4 dB/km
0.3 dB/km
Yellow
CB
OM1
200 MHz-km
3.5 dB/km
1.0 dB/km
Orange
GB
500 MHz-km
350 MHz-km
ZB
OM2
1.5 dB/km
LB
OM2+
950 MHz-km
700 MHz-km
3.0 dB/km
EB
OM3
2000 MHz-km
1500 MHz-km
Aqua
FB
OM4
4700 MHz-km
3500 MHz-km
XB
OM4+
4900 MHz-km
3675 MHz-km
NS = Not Specified
IMPORTANT NOTICE: This product specification is provided for informational purposes only in order to illustrate typical product constructions, applications and/or methods of installation. Because conditions of actual installation and use are unique and will vary, Berk-Tek makes no representation or warranty as to the reliability, accuracy or completeness of this data, even if Berk-Tek is aware of the product's intended use or purpose. Furthermore, this data does not constitute, nor should it be regarded or relied upon, as professional engineering advice. Installation of cable should only be done by qualified personnel and in conformance with all safety, electrical and other applicable codes, standards, rules or regulations. Appropriate and correct product selection, installation and use, and compliance with all such codes, standards, rules and regulations, is a customer/end-user responsibility. Product specifications, standards, programs or services are subject to improvement or changes without notice. Berk-Tek accepts no liability for typographical errors, technical inaccuracies, omissions or misuse of the information contained herein. Changes will be periodically made to address any such issues.
