PLTC / ITC - 300 V - PVC Insulated, PVC Jacketed
Instrumentation PLTC / ITC, 300 V, PVC, 105°C - LEAD FREE, Unshielded Pairs or Triads with Overall Shield, Shielded Pairs or Triads with Overall Shield, Type PLTC - UL 13 - Type ITC - UL 2250
StandardsNational : UL 13; UL 2250
The 300 V Instrumentation Cables are dual listed as Type PLTC per UL 13 and Type ITC per UL 2250. These cables are suitable for installations as outlined in NEC Article 725 for Type PLTC cables and NEC Article 727 for Type ITC cables. They are also a suitable substitute for General purpose Class 2 (CL2X) and Class 3 (CL3) wiring, as well as Dwelling unit Class 2 (CL2X) and Class 3 (CL3X) wiring as per NEC Article 725.
NEXANS Instrumentation Cables is LEAD FREE and RoHS compliant.
Conductor: Bare, annealed copper conforming to ASTM B3 and Class B stranded in accordance to ASTM B8.
Insulation: Polyvinyl chloride in accordance with UL 13 and UL 2250, flame retardant, 105°C temperature rating.
Insulation Shield (on shielded pair/triad constructions): Aluminum foil/polyester shield helically wrapped to provide 100% coverage with a tinned copper drain wire that is two gauge sizes smaller than the circuit conductors. These shields are electrically isolated from each other.
Assembly: Pairs/triads are cabled in concentric layers. In the case of unshielded pairs/triads, they are cabled at staggered lengths to reduce crosstalk.
Communication Wire: Orange communication wire is provided for calibration on 4 pair / triad and higher.
Overall cable shield: Aluminum foil/polyester shield helically wrapped to provide 100% coverage with a tinned copper drain wire that is the same size as the circuit conductors, with the exception of single pair/triad constructions where the drain wire is two gauge sizes smaller than the circuit conductors.
Jacket: UL listed sunlight and moisture resistant, sequentially length marked, black, flame retardant polyvinyl chloride material. A nylon ripcord is included for ease of jacket removal.
Pairs: black/white and number coded
Triads: black/white/red and number coded
Fixed Position: 5 x cable overall diameter
During Installation: 8 x cable overall diameter
|Maximum operating voltage||300V|
|Maximum operating temperature||105°C|
Products and services
Docs and info
The following constructions can be provided on special orders:
- Tinned copper conductors.
- When increased mechanical, chemical, or environmental protection is required, cables can be supplied with a continuously welded and corrugated impervious aluminum sheath armor and an outer PVC jacket.
- Interlocked aluminum armor with or without an additional outer PVC jacket.
- Direct Burial listed cable (when ordered as ITC/DB)
- Conductors with alternate color / identification codes
- Alternate jacket colors