LANmark-350 Plenum Rated Premium Category 5e UTP
Berk-Tek’s LANmark-350 Premium Category 5e UTP cables are ideally suited to support 100BASE-TX Ethernet. Tested up to 450 MHz, the guaranteed performance of this cable far exceeds the ANSI/TIA/EIA-568-C.2 and ISO/IEC 11801 Category 5e horizontal cable requirements for PSNEXT, attenuation, return loss, attenuation-to-crosstalk ratio (ACR) and impedance.
StandardsInternational : ISO/IEC 11801
National : ANSI/TIA-568-C.2; UL 444
Berk-Tek LANmark-350, Performance Guaranteed
Before any cable can display the Berk-Tek LANmark-350 legend, it must pass factory tests with a minimum of margin of 3dB for ACRF & PSACRF, 5 dB for NEXT & ACR and 6dB of margin for PSNEXT & PSACR beyond the CAT 5e standard. If the margin is missing, so is the legend. That is our guarantee to you.
Your business demands continuous performance from your IT network, so our specifications aren't simply numbers on the page. They define the way that we do business. This means that you are guaranteed industry-leading performance and quality for all Berk-Tek products.
Some other manufacturers talk about "typical" values, at Berk-Tek, we hold ourselves to a higher standard. We won't talk about typicals, we talk about what is true, guaranteed, and independently verified.
Keep your business running by relying on Berk-Tek.
Perform Beyond Expectations... Choose Berk-Tek.
Bare copper wire insulated with FEP. Two insulated conductors twisted together to form a pair and four such pairs cabled to form the basic unit jacketed with flame-retardant PVC.
- Plenum - NFPA 262, CMP
- UL Listed
- Small, round design
- ETL verified to TIA/EIA-568-C.2 and ISO/IEC 11801
- RoHS Compliant
- Reliably supports 100BASE-TX Ethernet
- Reduced installation costs and maintenance
- Characterized to 450 MHz, 350 MHz greater than standard
- Lower bit error rates, increases network efficiency and uptime
|Type of cable||UTP|
|Number of pairs||4|
|Field of application||Indoor|
|Fire safety||CMP - Plenum Rated|
|See all products|