216 x OM2 Adventum Plenum with Interlock Armor
|
|
|
|
|
Berk-Tek’s Adventum Armor-Tek™ products consist of indoor/outdoor rated fiber optic loose tube cables encased with an aluminum or steel spirally wrapped armor in an interlocking configuration. The armored cable is then covered with a plenum rated jacket to prevent snags during installation.
|
|
|
|
|
Standards
|
|
International
|
EN 50173; ISO/IEC 11801
|
|
National
|
ANSI/ICEA S-104-696; ANSI/ICEA S-87-640; ANSI/TIA-568-C.3; Telcordia GR-409
|
|
Description
|
|
Construction
Loose tube cable constructions (up to 432 optical fibers) with aluminum interlock armor and an overall plenum flame rated jacket. Steel interlock is also available.
Applications
Armor-Tek fiber cables can be used in any of the following installation enviroments: indoor/outdoor, in backbones, between closets and in fiber to the desk. Armor-Tek is a viable and cost effective solution for applications where a pathway is beyond its full ratio, for areas where extra physical security is a concern, in fast track installations, between buildings, direct buried, or in trays.
Berk-Tek recommends installation procedures per ANSI/TIA-758, Customer-owned Outside Plant Telecommunications Infrastructure Standard.
Berk-Tek's Adventum Loose Tube fiber optic cables (U.S. Patent No. 6,178,278) are suitable for all passive and active optical network designs requiring high speed data applications, including (but not limited to):
- 10BASE-FL
- 100BASE-SX/100BASE-FX
- ATM 155/ATM622
- 1000BASE-SX/1000BASE-LX
- Fibre Channel 1.062/2.125
- 10GBASE-SR/SW
- 10GBASE-LX4
- 40/100 GbE
Features
- Multimode, Single-mode and GIGAlite™ fibers
- Available with new bend-optimized single-mode fibers
- Jacketed armor remains flexible due to the spiral wrap armoring process
- Easy one-pull installation into any environment
- Compact outside diameters when compared to plenum innerduct or conduit
- High tensile strength, crush resistant
- Available Harsh Environment (HE), cables offer superior resistance to chemicals and fuels. Suitable for Petro-Chemical, Industrial, and airport installations.
Benefits
- Eliminates the need for conduit or plenum innerduct
- Significant cost savings in both materials and labor - up to 25%
- Accommodates last minute relocations or pathway changes
- Provides a higher concentration of cables in an area than conduit
- Can be installed in campus environments due to the durability and indoor/outdoor rating of the cable
- Armor provides crush protection and protection from rodent attacks
|
|
 |
Related links
|
 |
|
 TOP
|
Characteristics
|
|
Fiber optic type
|
OM2 50/125
|
|
|
Type of cable
|
Loose tube
|
|
|
Outer sheath
|
Plenum
|
|
|
Sheath colour
|
Orange
|
|
|
Armour type
|
Aluminum Interlock
|
|
|
Tube diameter
|
3mm
|
|
|
Number of optical fibres
|
216
|
|
|
Nominal outer diameter
|
1.004in
|
|
|
Nominal outer diameter
|
25.5mm
|
|
|
Approximate weight
|
331lb/kft
|
|
|
Approximate weight
|
493kg/km
|
|
|
Optical performance
|
ZB (50/125 FDDI, OM2)
|
|
|
Attenuation, max. 850 nm (cabled)
|
3.5dB/km
|
|
|
Attenuation, max. 1300 nm (cabled)
|
1.5dB/km
|
|
|
Maximum installation tension
|
1000lb
|
|
|
Maximum installation tension
|
4448.0N
|
|
|
Max. Load. Long Term (lbs)
|
300.0lb
|
|
|
Max. Load. Long Term
|
1335.0N
|
|
|
Crush resistance per TIA/EIA FOTP-41
|
440N/cm
|
|
|
Cable flexibility per TIA/EIA FOTP-104
|
100 cycles
|
|
|
Impacts per TIA/EIA FOTP-25
|
2 at 8.83 N-m
|
|
|
Minimum Bending Radius - Install
|
15.1in
|
|
|
Minimum Bend Radius - Install
|
38.3cm
|
|
|
Minimum Bending Radius - LongTerm
|
10in
|
|
|
Minimum Bending Radius - LongTerm
|
25.5cm
|
|
|
RoHS conform
|
Yes
|
|
|
Operating temperature, range
|
-40 .. 75°C
|
|
|
Ambient installation temperature, range
|
-20 .. 60°C
|
|
|
Storage temperature, range
|
-60 .. 85°C
|
|
|
Field of application
|
Indoor, Outdoor
|
|
TOP
|
Fiber Type
|
ISO-TIA
Standard
|
Effective Modal
BW @ 850 nm
|
Overfilled Launch
BW @ 850 nm
|
Attenuation
@ 850 nm
|
Attenuation
@ 1300 nm
|
Attenuation
@ 1550 nm
|
Sheath Color
|
|
AB
|
OS2
|
NS
|
NS
|
NS
|
0.4 dB/km
|
0.3 dB/km
|
Yellow
|
|
CB
|
OM1
|
200 MHz-km
|
200 MHz-km
|
3.5 dB/km
|
1.0 dB/km
|
NS
|
Orange
|
|
GB
|
OM1
|
500 MHz-km
|
350 MHz-km
|
3.5 dB/km
|
1.0 dB/km
|
NS
|
Orange
|
|
ZB
|
OM2
|
500 MHz-km
|
500 MHz-km
|
3.5 dB/km
|
1.5 dB/km
|
NS
|
Orange
|
|
LB
|
OM2+
|
950 MHz-km
|
700 MHz-km
|
3.0 dB/km
|
1.0 dB/km
|
NS
|
Orange
|
|
EB
|
OM3
|
2000 MHz-km
|
1500 MHz-km
|
3.0 dB/km
|
1.0 dB/km
|
NS
|
Aqua
|
|
FB
|
OM4
|
4700 MHz-km
|
3500 MHz-km
|
3.0 dB/km
|
1.0 dB/km
|
NS
|
Aqua
|
|
XB
|
OM4+
|
4900 MHz-km
|
3675 MHz-km
|
3.0 dB/km
|
1.0 dB/km
|
NS
|
Aqua
|
|
NS = Not Specified
|
TOP
|
Manufacturing Release
|
|
IMPORTANT NOTICE: This product specification is provided for informational purposes only in order to illustrate typical product constructions, applications and/or methods of installation. Because conditions of actual installation and use are unique and will vary, Berk-Tek makes no representation or warranty as to the reliability, accuracy or completeness of this data, even if Berk-Tek is aware of the product's intended use or purpose. Furthermore, this data does not constitute, nor should it be regarded or relied upon, as professional engineering advice. Installation of cable should only be done by qualified personnel and in conformance with all safety, electrical and other applicable codes, standards, rules or regulations. Appropriate and correct product selection, installation and use, and compliance with all such codes, standards, rules and regulations, is a customer/end-user responsibility. Product specifications, standards, programs or services are subject to improvement or changes without notice. Berk-Tek accepts no liability for typographical errors, technical inaccuracies, omissions or misuse of the information contained herein. Changes will be periodically made to address any such issues.
|
TOP
|
LTPK12B216ZB3515/55
