Login Get Registered Catalog Browser Contact Us
Electrical Cable, Data Cable, and Specialty Cables

About Nexans

Products and Solutions

Customer Service

Work at Nexans

News and Press

Go

2 x OM2 Interconnect Riser Zipcord Cable

Send link to this page Generate PDF Your Nexans contact on this page
2 x OM2 Interconnect Riser Zipcord Cable Berk-Tek's Interconnect Tight Buffered Riser fiber optic cable is designed for installation in riser horizontal structured cabling applications.
REFERENCES
ICR0X0ZB3515/55
Standards
Description
Characteristics
Related Information
Standards
International  EN 50173; ISO/IEC 11801
National  ANSI/ICEA S-83-596; ANSI/TIA-568-C.3; Telcordia GR-409
Description

Berk-Tek's Riser Interconnect Tight Buffered cables are available with standard multimode, single-mode, and GIGAliteTM optical fibers.

 

Construction

900 µm buffered fibers surrounded by aramid yarns.  Sheathed using a special state-of-the-art, polymer material. 

All Dielectric.   OFNR(UL)  OFN-FT4 c(UL) 

 

Applications

Berk-Tek's Interconnect Tight Buffered Cable is intended for all high speed data applications including:

  • 10BASE-FL
  • 100BASE-SX/100BASE-FX
  • ATM 155/ATM 622
  • 1000BASE-SX/1000BASE-LX
  • Fibre Channel 1.062/2.125
  • 10GBASE-SR/SW
  • 10GBASE-LX4
  • 40/100 GbE

 

Features

  • Flexible, small diameter, 900 um tight buffered construction
  • High tensile strength and small diameter design
  • 1 through 4 fiber designs for patch cable and horizontal installations

 

Benefits

  • Also available in low-smoke zero-halogen design
  • Cost-saving design is easy to install and terminate
  • Space-saving design allows for dense cable installations

 


 TOP
Characteristics
Construction characteristics
Fiber optic type OM2 50/125  
Type of cable Tight Buffered (TB)  
Outer sheath Riser  
Sheath colour Orange  
Dimensional characteristics
Number of optical fibres 2  
Outer Diameter (inch) 0.114 x 0.232  
Outer Diameter (mm) 2.9 x 5.9  
Approximate weight 12lb/kft  
Approximate weight 18kg/km  
Transmission characteristics
Optical performance ZB (50/125 FDDI, OM2)  
Attenuation, max. 850 nm (cabled) 3.5dB/km  
Attenuation, max. 1300 nm (cabled) 1.5dB/km  
Mechanical characteristics
Maximum installation tension 50lb  
Maximum installation tension 220.0N  
Max. Load. Long Term (lbs) 15.0lb  
Max. Load. Long Term 66.0N  
Impacts per TIA/EIA FOTP-25 2 at 0.74 N-m  
Crush resistance per TIA/EIA FOTP-41 220N/cm  
Cable flexibility per TIA/EIA FOTP-104 100 cycles  
Usage characteristics
Minimum Bending Radius - Install 1.7in  
Minimum Bend Radius - Install 4.3cm  
Minimum Bending Radius - LongTerm 1.1in  
Minimum Bending Radius - LongTerm 2.9cm  
RoHS conform Yes  
Operating temperature, range -20 .. 85°C  
Ambient installation temperature, range -10 .. 70°C  
Storage temperature, range -40 .. 85°C  
Field of application Indoor  

 TOP
Sheath Colors

Fiber Type

ISO-TIA
Standard

Effective Modal
BW @ 850 nm

Overfilled Launch
BW @ 850 nm

Attenuation
@ 850 nm

Attenuation
@ 1300 nm

Attenuation
@ 1550 nm

Sheath Color

AB

OS2

NS

NS

NS

0.7 dB/km

0.7 dB/km

Yellow

CB

OM1

200 MHz-km

200 MHz-km

3.5 dB/km

1.0 dB/km

NS

Orange

GB

OM1+

500 MHz-km

350 MHz-km

3.5 dB/km

1.0 dB/km

NS

Orange

ZB

OM2

500 MHz-km

500 MHz-km

3.5 dB/km

1.5 dB/km

NS

Orange

LB

OM2+

950 MHz-km

700 MHz-km

3.0 dB/km

1.0 dB/km

NS

Orange

EB

OM3

2000 MHz-km

1500 MHz-km

3.0 dB/km

1.0 dB/km

NS

Aqua

FB

OM4

4700 MHz-km

3500 MHz-km

3.0 dB/km

1.0 dB/km

NS

Aqua

XB

OM4+

4900 MHz-km

3675 MHz-km

3.0 dB/km

1.0 dB/km

NS

Aqua

NS = Not Specified


 TOP
Manufacturing Release

IMPORTANT NOTICE: This product specification is provided for informational purposes only in order to illustrate typical product constructions, applications and/or methods of installation. Because conditions of actual installation and use are unique and will vary, Berk-Tek makes no representation or warranty as to the reliability, accuracy or completeness of this data, even if Berk-Tek is aware of the product's intended use or purpose. Furthermore, this data does not constitute, nor should it be regarded or relied upon, as professional engineering advice. Installation of cable should only be done by qualified personnel and in conformance with all safety, electrical and other applicable codes, standards, rules or regulations. Appropriate and correct product selection, installation and use, and compliance with all such codes, standards, rules and regulations, is a customer/end-user responsibility. Product specifications, standards, programs or services are subject to improvement or changes without notice. Berk-Tek accepts no liability for typographical errors, technical inaccuracies, omissions or misuse of the information contained herein. Changes will be periodically made to address any such issues.


 TOP
   Fiber Specifications PS0309.revR (35 kB)



Nexans © copyright 2001 - 2012   Legal Notice | Contact Us | Site Map