Hybrid 24xOM1 & 12xOS2 Premise Distribution Plenum Cable with Interlocking Armor
|
|
|
|
|
Berk-Tek's Premises Distribution cable is a Plenum rated tight buffered design. Armor-Tek Interlocking Armor is wrapped around the Premises Distribution cable core. A plenum rated sheath is the extruded around the interlocking armor.
|
|
|
|
|
Standards
|
|
International
|
EN 50173; ISO/IEC 11801
|
|
National
|
ANSI/ICEA S-83-596; ANSI/TIA-568-C.3; Telcordia GR-409
|
|
Description
|
|
Construction
- 900 µm buffered fibers surrounded by aramid yarns
- Sheathed using a special, state-of-the-art polymer material
- Aluminum and Steel interlock armor available
- OFCP Rated
Outdoor Considerations
Black jacketed and water-blocked versions of this plenum cable is available upon request for outdoor installations. Outdoor versions feature UV and fungus resistant jacketing.
Applications
Berk-Tek's tight buffered Interlocking Armor cable is intended for all high speed data applications including:
- 10BASE-FL
- 100BASE-SX/100BASE-FX
- ATM 155/ATM 622
- 1000BASE-SX/1000BASE-LX
- Fibre Channel 1.062/2.125
- 10GBASE-SR/SW
- 10GBASE-LX4
- 40/100 GbE
Features
- Single-mode, multimode, GIGAliteTM and hybrid designs available
- Available with new bend-optimized single-mode fibers
- High tensile strength, crush resistant
- Flexible, small diameter, 900 µm tight buffered construction core
- Six to 144 count fiber construction plenum designs ideal for horizontal and backbone and installations and along plenums
- Also available in low smoke zero halogen design
- Configurations available suitable for indoor/outdoor installations in conduit, below the frost line
Benefits
- Eliminates the need for conduit or plenum innerduct
- Significant cost savings in both materials and labor - up to 25%
- Accommodates last minute relocations or pathway changes
- Provides a higher concentration of cables in an area than conduit
- Can be installed in campus environments due to the durability and indoor/outdoor rating of the cable
- Armor provides crush protection and protection from rodent attacks
|
|
 TOP
|
Characteristics
|
|
Fiber optic type
|
OM1 62.5/125 Extended Distance / Single-mode 9/125
|
|
|
Type of cable
|
Tight Buffered (TB)
|
|
|
Outer sheath
|
Plenum
|
|
|
Sheath colour
|
Orange
|
|
|
Armour type
|
Aluminum Interlock
|
|
|
Number of optical fibres
|
36
|
|
|
Nominal outer diameter
|
0.821in
|
|
|
Nominal outer diameter
|
20.9mm
|
|
|
Approximate weight
|
233lb/kft
|
|
|
Approximate weight
|
347kg/km
|
|
|
Optical performance
|
Hybrid CB (62.5/125 Standard, OM1) / AB (Single-mode, OS2)
|
|
|
Attenuation, max. 850 nm (cabled)
|
3.5dB/km
|
|
|
Attenuation, max. 1300 nm (cabled)
|
1.0dB/km
|
|
|
Attenuation, max. 1310 nm (cabled)
|
0.7dB/km
|
|
|
Attenuation, max. 1550 nm (cabled)
|
0.7dB/km
|
|
|
Maximum installation tension
|
300lb
|
|
|
Maximum installation tension
|
1335.0N
|
|
|
Max. Load. Long Term (lbs)
|
90.0lb
|
|
|
Max. Load. Long Term
|
400.0N
|
|
|
Impacts per TIA/EIA FOTP-25
|
2 at 8.83 N-m
|
|
|
Crush resistance per TIA/EIA FOTP-41
|
440N/cm
|
|
|
Cable flexibility per TIA/EIA FOTP-104
|
100 cycles
|
|
|
Minimum Bending Radius - Install
|
12.3in
|
|
|
Minimum Bend Radius - Install
|
31.3cm
|
|
|
Minimum Bending Radius - LongTerm
|
8.2in
|
|
|
Minimum Bending Radius - LongTerm
|
20.9cm
|
|
|
RoHS conform
|
Yes
|
|
|
Operating temperature, range
|
-20 .. 75°C
|
|
|
Ambient installation temperature, range
|
0 .. 75°C
|
|
|
Storage temperature, range
|
-40 .. 85°C
|
|
|
Field of application
|
Indoor
|
|
TOP
|
Fiber Type
|
ISO-TIA
Standard
|
Effective Modal
BW @ 850 nm
|
Overfilled Launch
BW @ 850 nm
|
Attenuation
@ 850 nm
|
Attenuation
@ 1300 nm
|
Attenuation
@ 1550 nm
|
Sheath Color
|
|
AB
|
OS2
|
NS
|
NS
|
NS
|
0.7 dB/km
|
0.7 dB/km
|
Yellow
|
|
CB
|
OM1
|
200 MHz-km
|
200 MHz-km
|
3.5 dB/km
|
1.0 dB/km
|
NS
|
Orange
|
|
GB
|
OM1+
|
500 MHz-km
|
350 MHz-km
|
3.5 dB/km
|
1.0 dB/km
|
NS
|
Orange
|
|
ZB
|
OM2
|
500 MHz-km
|
500 MHz-km
|
3.5 dB/km
|
1.5 dB/km
|
NS
|
Orange
|
|
LB
|
OM2+
|
950 MHz-km
|
700 MHz-km
|
3.0 dB/km
|
1.0 dB/km
|
NS
|
Orange
|
|
EB
|
OM3
|
2000 MHz-km
|
1500 MHz-km
|
3.0 dB/km
|
1.0 dB/km
|
NS
|
Aqua
|
|
FB
|
OM4
|
4700 MHz-km
|
3500 MHz-km
|
3.0 dB/km
|
1.0 dB/km
|
NS
|
Aqua
|
|
XB
|
OM4+
|
4900 MHz-km
|
3675 MHz-km
|
3.0 dB/km
|
1.0 dB/km
|
NS
|
Aqua
|
|
NS = Not Specified
|
TOP
|
Hybrid Subunit Colors and Fiber Types
|
|
| Subunit Color |
Fiber Type |
| Orange |
OM1 |
| Yellow |
OS1 |
|
TOP
|
Cross-section Diagram - PDPK12B036
|
|
|
TOP
|
Manufacturing Release
|
|
IMPORTANT NOTICE: This product specification is provided for informational purposes only in order to illustrate typical product constructions, applications and/or methods of installation. Because conditions of actual installation and use are unique and will vary, Berk-Tek makes no representation or warranty as to the reliability, accuracy or completeness of this data, even if Berk-Tek is aware of the product's intended use or purpose. Furthermore, this data does not constitute, nor should it be regarded or relied upon, as professional engineering advice. Installation of cable should only be done by qualified personnel and in conformance with all safety, electrical and other applicable codes, standards, rules or regulations. Appropriate and correct product selection, installation and use, and compliance with all such codes, standards, rules and regulations, is a customer/end-user responsibility. Product specifications, standards, programs or services are subject to improvement or changes without notice. Berk-Tek accepts no liability for typographical errors, technical inaccuracies, omissions or misuse of the information contained herein. Changes will be periodically made to address any such issues.
|
TOP
|
PDPK12B036-024CB3510/25-012AB0707
