Description
Standards
National : ANSI/TIA-568.3-DDescription
Assembly is a factory terminated harness used to convert from 10 to 40 gigabit Ethernet, or 25 to 100 gigabit Ethernet.
Construction
The cable is 3.0mm round and contains 8 fibers. Side A is terminated with a MPO connector (no pins). Side B is broken out into 4 duplex legs and terminated with LC uniboot connectors.
Performance
- The insertion loss is tested at the factory and test reports are provided.
- The harness has a unique polarity, allowing the transition from four ports into one port. The polarity is tested at the factory to ensure correctness.
- The cable features a small bend radius of 30mm and has bend insensitive fibers inside.
Features
- Plenum flame rating
- < 0.5 dB insertion loss for the MPO
- < 0.3 dB insertion loss for the LCs
- User configurable length
- Polarity and length printed on label
- 3.0mm round break-out legs
Characteristics
| Construction characteristics | |
|---|---|
| Sheath colour | Aqua |
| Fiber optic type | OM4 50/125 |
| Dimensional characteristics | |
| Nominal outer diameter | 3.0mm |
| Mechanical characteristics | |
| 2 Impacts per TIA/EIA FOTP-41 | 1.47N.m |
| Crush resistance per TIA/EIA FOTP-41 | 35N/cm |
| Mechanical resistance to impacts (IEC 60794-1-E4) | 1 impact of 20 N.m |
| Usage characteristics | |
| Recommended storage temperature range | -40 .. 75°C |
| Minimum Bend Radius - Installed | 30mm |
| Recommended operating temperature range | 0 .. 75°C |
Docs and info
Jacket Colors - NDS
|
Fiber |
Core |
ISO-TIA |
Effective Modal |
Overfilled Launch |
Attenuation |
Attenuation |
Attenuation |
Jacket Color |
|
4 |
8.3 |
OS2 |
NS |
NS |
NS |
0.4 dB/km |
0.3 dB/km |
Yellow |
|
5 |
50 |
OM3 |
2000 MHz-km |
1500 MHz-km |
3.0 dB/km |
1.0 dB/km |
NS |
Aqua |
|
7 |
50 |
OM4 |
4700 MHz-km |
3500 MHz-km |
3.0 dB/km |
1.0 dB/km |
NS |
Aqua |
|
8 |
50 |
OM4+ |
4900 MHz-km |
3675 MHz-km |
2.7 dB/km |
1.0 dB/km |
NS |
Violet |
|
9 |
50 |
OM5 |
4700 MHz-km |
3500 MHz-km |
3.0 dB/km |
1.0 dB/km |
NS |
Lime Green |
|
NS = Not Specified |
||||||||
-
Harness Drawing
-
Manufacturing Release - NDS
IMPORTANT NOTICE: This product specification is provided for informational purposes only in order to illustrate typical product constructions, applications and/or methods of installation. Because conditions of actual installation and use are unique and will vary, Nexans makes no representation or warranty as to the reliability, accuracy or completeness of this data, even if Nexans is aware of the product's intended use or purpose. Furthermore, this data does not constitute, nor should it be regarded or relied upon, as professional engineering advice. Installation of product should only be done by qualified personnel and in conformance with all safety, electrical and other applicable codes, standards, rules or regulations. Appropriate and correct product selection, installation and use, and compliance with all such codes, standards, rules and regulations, is a customer/end-user responsibility. Product specifications, standards, programs or services are subject to improvement or changes without notice. Nexans accepts no liability for typographical errors, technical inaccuracies, omissions or misuse of the information contained herein. Changes will be periodically made to address any such issues.
