Description
Standards
International : EN 50173; ISO/IEC 11801Description
Construction
- 900 µm buffered fibers surrounded by aramid yarns
- Sheathed using a special, state-of-the-art polymer material
- Aluminum and Steel interlock armor available
- OFCP Rated
Outdoor Considerations
Black jacketed and core water-blocked cables from 6 to 24 fibers are available upon request for outdoor installations. Outdoor versions feature UV and fungus resistant jacketing.
Features
- Single-mode, multimode, GIGAliteTM and hybrid designs available
- Available with new bend-optimized single-mode fibers
- High tensile strength, crush resistant
- Flexible, small diameter, 900 µm tight buffered construction core
- Six to 144 count fiber construction plenum designs ideal for horizontal and backbone and installations and along plenums
- Also available in low smoke zero halogen design
- Configurations available suitable for indoor/outdoor installations in conduit, below the frost line
Benefits
- Eliminates the need for conduit or plenum innerduct
- Significant cost savings in both materials and labor - up to 25%
- Accommodates last minute relocations or pathway changes
- Provides a higher concentration of cables in an area than conduit
- Can be installed in campus environments due to the durability and indoor/outdoor rating of the cable
- Armor provides crush protection and protection from rodent attacks
- Compliant to NFPA 130 (2010)
Characteristics
| Construction characteristics | |
|---|---|
| Fiber optic type | OM4 50/125 |
| Type of cable | Tight Buffered (TB) |
| Jacket Material | Plenum |
| Sheath colour | Aqua |
| Armour type | Aluminum Interlock |
| Dimensional characteristics | |
| Number of optical fibres | 12 |
| Cable diameter (Nominal) | 0.523in |
| Nominal outer diameter | 13.3mm |
| Nominal cable weight | 87lb/kft |
| Approximate weight | 129kg/km |
| Transmission characteristics | |
| Optical performance | FB (50/125 GIGAlite 10-FB, OM4) |
| Attenuation, max. 850 nm (cabled) | 3.0dB/km |
| Attenuation, max. 1300 nm (cabled) | 1.0dB/km |
| Mechanical characteristics | |
| Maximum installation tension | 100lb |
| Maximum installation tension | 445N |
| Max. Load. Long Term (lbs) | 30.0lb |
| Max. Load. Long Term | 133.0N |
| Impacts per TIA/EIA FOTP-25 | 2 at 4.41 N-m |
| Crush resistance per TIA/EIA FOTP-41 | 440N/cm |
| Cable flexibility per TIA/EIA FOTP-104 | 25 cycles |
| Usage characteristics | |
| Minimum Bending Radius - Install | 7.8in |
| Minimum Bend Radius - Install | 19.9cm |
| Minimum Bending Radius - LongTerm | 5.2in |
| Minimum Bending Radius - LongTerm | 13.3cm |
| Recommended operating temperature range | -20 .. 75°C |
| Ambient installation temperature, range | 0 .. 75°C |
| Recommended storage temperature range | -40 .. 85°C |
| Field of application | Indoor |
Docs and info
Standard Sheath Colors
|
Fiber Type |
Core |
ISO-TIA |
Effective Modal |
Overfilled Launch |
Attenuation |
Attenuation |
Attenuation |
Sheath Color |
|
4 |
8.3 |
OS2 |
NS |
NS |
NS |
0.5 dB/km |
0.5 dB/km |
Yellow |
|
1 |
62.5 |
OM1 |
200 MHz-km |
200 MHz-km |
3.5 dB/km |
1.0 dB/km |
NS |
Orange |
|
2 |
50 |
OM2+ |
950 MHz-km |
700 MHz-km |
3.0 dB/km |
1.0 dB/km |
NS |
Orange |
|
5 |
50 |
OM3 |
2000 MHz-km |
1500 MHz-km |
3.0 dB/km |
1.0 dB/km |
NS |
Aqua |
|
7 |
50 |
OM4 |
4700 MHz-km |
3500 MHz-km |
3.0 dB/km |
1.0 dB/km |
NS |
Aqua |
|
8 |
50 |
OM4+ |
4900 MHz-km |
3675 MHz-km |
3.0 dB/km |
1.0 dB/km |
NS |
Violet |
|
9 |
50 |
OM5 |
4700 MHz-km |
3500 MHz-km |
3.0 dB/km |
1.0 dB/km |
NS |
Lime Green |
|
NS = Not Specified |
||||||||
-
Optical Fiber Cable Applications
Nexans' fiber optic cable is intended for all high speed data applications, including:
- ETHERNET: 10BASE – 400GBASE (10BASE, 100BASE, 1000BASE, 10GBASE, 40GBASE, 100GBASE, 400GBASE)
- Fibre Channel: 1G-FC – 128GFC (1, 2, 4, 8, 16, 32, 128 GFC)
- SONET: OC-1 – OC-768 (OC -1, 3, 12, 24, 48, 192, 768)
- SDH: STM-0 – STM-256 (STM-0, 1, 4, 16, 64, 256)
- OTN: OTU-1 – OTU4 (OTU1, 2, 2e, 2f, 3, 3e2, 4)
- CPRI: CPRI-1 – CPRI-9 (CPRI-1, 2, 3, 4, 5, 6, 7, 7a, 8, 9)
- PON (SMF only): RFoG, APON, BPON, EPON, GPON, WDM-PON, NG-PON
-
Manufacturing Release
IMPORTANT NOTICE: This product specification is provided for informational purposes only in order to illustrate typical product constructions, applications and/or methods of installation. Because conditions of actual installation and use are unique and will vary, Nexans makes no representation or warranty as to the reliability, accuracy or completeness of this data, even if Nexans is aware of the product's intended use or purpose. Furthermore, this data does not constitute, nor should it be regarded or relied upon, as professional engineering advice. Installation of product should only be done by qualified personnel and in conformance with all safety, electrical and other applicable codes, standards, rules or regulations. Appropriate and correct product selection, installation and use, and compliance with all such codes, standards, rules and regulations, is a customer/end-user responsibility. Product specifications, standards, programs or services are subject to improvement or changes without notice. Nexans accepts no liability for typographical errors, technical inaccuracies, omissions or misuse of the information contained herein. Changes will be periodically made to address any such issues.
