Description
62.5/125
Standards
International : EN 4641-101Description
Applications
Harsh environments such as: aeronautics, geophysics, missile, chemical industry
Construction
- OPTICAL FIBRE
Core + cladding + coating
Silica/Silica/Silicone
Type 62.5/125/400 μm
OUTER JACKET
Copolymer 0 Halogen
High temperature
Diameter : 0.90 mm ± 0.05 mm
Characteristics
Construction characteristics | |
---|---|
Sheath colour | Black |
Docs and info
Main Characteristics
|
|||||
Operating Temperature |
Long Term |
-55 to +125°C |
|||
Maximum Pulling Force |
10 N/s |
||||
Minimum Bend Radius |
Long Term |
10 mm |
|||
Maximum Attenuation at 20°C |
At 850 nm |
4 dB/km |
|||
Effective index of Retraction |
At 850 nm |
1.4970 |
|||
Numerical aperture |
0.275 +/- 0.015 |
||||
Cable Bandwidth (MHz.km) |
At 850 nm |
> 400 |
-
Strong Points
Mechanical properties:
- Small diameter
- Low weight
- High temperature
- High flexibility
- Low bending radius
- Easy strippability
Optical properties:
- High bandwidth
- Low cost ferrules (Telecom component)
Chemical properties:
- High chemical resistance to on board fluids
- No flame propagation
- Very low smoke density and toxicity
-
Cable preparation for connector mounting
- Stripping of primary jacket, buffer and coating.
- If mechanical stipping is used, we highly recommed:
- To strip directly from primary jacket to silica
- To carefully clean silica with a solvent such as MEK (Methylethylketone).
- Residues of silicone can be removed with a wet tissue by wiping off of different angles in order to clean all the circumference of the silica.
- If you dip bare fibre into solvent, take care to avoid contact between solvent and other part of the cable such as strength members, silicone and jacket