ENSPACE Patch Cord Duplex LC Uniboot New
Reversible LC uniboot patch cord for patching the front of an ENSPACE panel.
StandardsNational : ANSI/TIA-568.3-D
Optimized for Data Center Environments
ENSPACE patch cords have a very small bend radius that is beneficial in high density patching areas where a lot of bends are common. The large bend radius of traditional patch cords is more difficult to maintain, and could lead to high attenuation and loss of transmission. The round design of the ENSPACE patch cord results in space savings, reduced disturbance of the cooling airflow, and easier cord management.
- Plenum flame rating
- 0.30 dB insertion loss
- User configurable length (in meters)
- Polarity configured as A-B from factory
- Length and polarity shown on the labels
- Custom labels available upon request
- Purchase as 1 each or in packs of 10
Nexans patch cords are delivered according to the "Cross-Over" (A-B) wiring principle to improve field installation.
The polarity of ENSPACE patch cords can be changed by opening the uniboot connector on one side and changing the position of the 2 LC connectors. Black and red plastic squares identify the fibers inside the patch cord. The patch cords are delivered with the black square on the left side on Side A and on the right side on Side B. This is required for cross-over or optically crossed patch cords. By changing the position of the black square on Side A from the left to the right, the patch cord becomes an optically straight patch cord.