LANmark-B789 Cat 5e Profinet Solid 2-Pr Shielded TPE
Description
Nexans LANmark Industrial Medium-Duty Ethernet Cables enable the expansion and integration of Ethernet into the Industrial environment. With over 50 years of manufacturing expertise, you can be sure these Industrial Cables will perform both mechanically and electrically. This cable is specifically designed to meet the requirements of the Profinet Type A standard, including its PLTC and ITC listings. With its 600V AWM design, durable TPE jacket, cold-bend performance, and resistance to oil, weld spatter, and sunlight, this cable is suitable for demanding and static industrial applications. This product has both a foil shield and a braid to protect against low- and high-frequency noise on the factory floor. Additionally, the stranded conductors also help maintain performance in a high-vibration environment. Per the NFPA 70 and NEC 500, this PLTC cable is permitted to be installed in Class I, Division 2, hazardous locations.
Description
Standards
International : ISO/IEC 11801National : ANSI/TIA-568-C.2; UL 444
Description
Construction
22 AWG solid tinned copper wire insulated with HDPE. Two insulated conductors twisted together to form a pair and two such pairs to form the basic unit, enclosed by foamed PP tape and shielded with a 75% optical coverage braid and an aluminum/polyester tape contained within a TPE jacket.
Related Standards
Low Voltage - EU Directive 2014/35/EU, CE Approved
RoHS - EU Directive 2011/65/EU
PoE+ - Type 2 (802.3at)
| Ratings | ||
|---|---|---|
| Description | Method | |
| Listed Type | UL1666 | CMR |
| Listed Type | UL444 | CMX Outdoor |
| Listed Type | UL13 / UL2250 | PLTC / ITC |
| Oil Resistance | UL1277 12.2 | II (75°C) |
| Sunlight Resistance | UL444 (7.22) | Yes (720 hrs) |
| Attributes | ||
| Description | Method | |
| AWM Style | UL758 | 2463 (600V, 80°C) |
| Installation Pull Tension (Max): | ||
| Bend Radius: > 3 inch | Internal | 40 lbs. |
| Bend Radius: > 1.22 inch | TIA 568-C.0 | 25 lbs. |
| Abrasion | UL2556 7.10 | 75 cycles/1.5 lb. load |
Characteristics
| Construction characteristics | |
|---|---|
| Conductor material | 22 AWG Solid Tinned Copper |
| Insulation | HDPE |
| Jacket Material | TPE |
| Braid | Tinned copper - 75% optical coverage |
| Shielding | Aluminum/Polyester |
| Core Tape | Foamed polypropylene |
| Dimensional characteristics | |
| Insulated conductor diameter (Nominal) | 0.054in |
| Average jacket thickness | 0.04in |
| Minimum jacket thickness at any point | 0.032in |
| Cable diameter (Nominal) | 0.305in |
| Nominal cable weight | 46lb/kft |
| Length per reel | 1000.0ft |
| Electrical characteristics | |
| Mutual capacitance | 5.6 nF/100m max. |
| DC Resistance (max.) | 9.38Ohm/100m |
| DC resistance unbalance (max.) | 5% |
| Nominal velocity of propagation | 67% |
| Maximum pair to ground unbalance | 330pF/100m |
| Transmission characteristics | |
| Skew (max.) | 45ns/100m |
| Usage characteristics | |
| Profinet Type | A |
| Minimum Bending Radius - Install | 2.44in |
| Recommended installation temperature range | -20 .. 80°C |
| Recommended operating temperature range | -40 .. 80°C |
| Recommended storage temperature range | -40 .. 80°C |
| Cold Bend | -40°C |
| Weld spatter resistance | Yes |
| Specific characteristics | |
| See all products | |
| |
Products and services
Docs and info
-
LANmark-B789 - Technical Information
Electrical Characteristics Parameter Frequency Equation RL (dB) 1-10 MHz 20+5*Log(F) 10-20 MHz 25 20-100 MHz 25-7*Log(F/20) Insertion Loss (dB/100m) 1-100 MHz 1.967*√F+0.023*F+0.050/√F NEXT (dB) 1-100 MHz 35.3-15*Log(F/100) PS-NEXT (dB) 1-100 MHz 32.3-15*Log(F/100) ACR (dB/100m) 1-100 MHz NEXT - Insertion Loss PS-ACR 1-100 MHz PS-NEXT - Insertion Loss ACRF (dB) 1-100 MHz 23.8-20*Log(F/100) PSACRF (dB) 1-100 MHz 20.8-20*Log(F/100) Propagation Delay 1-100 MHz 534+(36/√F) Min Coupling Attenuation (dB/100m) 30-100 MHz 55 Max Transfer Impedance 1; 10; 30; 100 50; 100; 200; 1000 Transmission Characteristics Description ISO/IEC 11801 Category 5 ANSI/TIA-568-C.2 Category 5e Coupling Attenuation IEC 61156-5 Type I Transfer Impedance IEC 61156-5 Grade 2 Color Code Pair-1 White Blue Pair-2 Yellow Orange
