Pre-Terminated Copper Bundles
Description
Leveraging Berk-Tek’s best in class LANmark-6 and LANmark-1000 Category 6 cable, the Berk-Tek Pre-Terminated copper bundles offer superior performance for high density cabling and data center applications. Available in bundles of 6 or 12 cables, jack to jack, jack to plug, plug to plug, or any termination combined with blunt ends can be ordered per the part number chart below. In the default configuration, cables are held in place together by a durable adhesive helical binding to maintain structure throughout the assembly and simplify installation. Other group sizing and bundling techniques can be made available upon request.
Description
Standards
International : ISO/IEC 11801Description
Installation and Time Savings
Berk-Tek LANmark Pre-Terminated Copper bundles help reduce the installation cost and risk as field termination is eliminated, and connections are applied and 100% tested in the factory. This dramatically reduces deployment time, enabling massive cabling deployments in data centers within very short time periods. Each assembly is labeled with a traceability number and a link, or leg, reference that can be specified by the customer.
Product Benefits
- Fast and straightforward installation in bundles of 6 or 12 cables
- Best in class performance with Berk-Tek LANmark-6 or LANmark-1000 cables
- Available in Plenum or Riser rating
- Customizable numbering / labeling on each leg
- No need for field termination, reducing installation time and risk
- 100% factory testing
- Variable lengths up to 90 m. Please refer to Berk-Tek design guidelines for length calculations and limitations according to standards
- Robust Mechanical Performance
Standards Compliance
- ANSI/TIA-568.2-D Category 6
- ISO/IEC 11801 2nd Edition Class E Category 6
- UL 444
Characteristics
| Construction characteristics | |
|---|---|
| Connector type | RJ 45 |
| Type of cable | U/UTP |
| Dimensional characteristics | |
| Number of pairs | 4 |
| Usage characteristics | |
| Category | Cat. 6 |
| Field of application | Indoor |
Docs and info
-
Installation Example Illustration
-
Ordering Information - Preterm Copper Bundles
-
Manufacturing Release
IMPORTANT NOTICE: This product specification is provided for informational purposes only in order to illustrate typical product constructions, applications and/or methods of installation. Because conditions of actual installation and use are unique and will vary, Berk-Tek makes no representation or warranty as to the reliability, accuracy or completeness of this data, even if Berk-Tek is aware of the product's intended use or purpose. Furthermore, this data does not constitute, nor should it be regarded or relied upon, as professional engineering advice. Installation of product should only be done by qualified personnel and in conformance with all safety, electrical and other applicable codes, standards, rules or regulations. Appropriate and correct product selection, installation and use, and compliance with all such codes, standards, rules and regulations, is a customer/end-user responsibility. Product specifications, standards, programs or services are subject to improvement or changes without notice. Berk-Tek accepts no liability for typographical errors, technical inaccuracies, omissions or misuse of the information contained herein. Changes will be periodically made to address any such issues.
