60 x OM4+ Outside Plant Dry Loose Tube Single Armor Single Jacket


See all Outside Plant Dry Loose Tube - Single Armor Single Jacket (LTAD-1A1J-M2) products
Description
Standards
National : ANSI/ICEA S-87-640; ANSI/TIA-568.3-D; Telcordia GR-20Description
Berk-Tek's Outdoor Single Armor Single Jacket Dry Tube Jacket Loose Tube cables are available in multimode, single-mode and GIGAlite™ fibers.
Buffer Tube Construction
Tubes contain water-blocking yarn and up to 12, 250 µm, individually colored fibers.
Outdoor Consideration
Berk-Tek recommends that loose tube cables be utilized in an outside plant installation environment. Loose tube cables are especially recommended if the interbuilding conduit system is above the frost line and likely to fill with water.
Applications
Berk-Tek's Outdoor Loose Tube fiber optic cable is intended for all high speed data applications, including:
- ETHERNET: 10BASE – 400GBASE (10BASE, 100BASE, 1000BASE, 10GBASE, 40GBASE, 100GBASE, 400GBASE)
- Fibre Channel: 1G-FC – 128GFC (1, 2, 4, 8, 16, 32, 128 GFC)
- SONET: OC-1 – OC-768 (OC -1, 3, 12, 24, 48, 192, 768)
- SDH: STM-0 – STM-256 (STM-0, 1, 4, 16, 64, 256)
- OTN: OTU-1 – OTU4 (OTU1, 2, 2e, 2f, 3, 3e2, 4)
- CPRI: CPRI-1 – CPRI-9 (CPRI-1, 2, 3, 4, 5, 6, 7, 7a, 8, 9)
Features
- High tensile strength, crush resistant and small diameter design.
- Single-mode, multimode and hybrid design options available.
- Corrugated steel armor provides crush and rodent resistance.
- Fully water-blocked core using dry water blocking system.
Benefits
- Provides for greater pulling distances thus reducing installation time.
- Broad design selection allows for mix and match of fiber components to specific networking applications.
- Long-term reliability.
- Low cable plant maintenance, ease of installation.
- Reduce network costs.
Characteristics
Construction characteristics | |
---|---|
Fiber optic type | OM4+ 50/125 Extended Distance |
Type of cable | Loose tube |
Jacket Material | Polyethylene |
Sheath colour | Black |
Dimensional characteristics | |
Tube diameter | 2.5mm |
Number of optical fibres | 60 |
Cable diameter (Nominal) | 0.46in |
Nominal outer diameter | 11.6mm |
Nominal cable weight | 75lb/kft |
Approximate weight | 111kg/km |
Transmission characteristics | |
Optical performance | XB (50/125 GIGAlite-10XB, OM4+ Extended Distance) |
Attenuation, max. 850 nm (cabled) | 3.0dB/km |
Attenuation, max. 1300 nm (cabled) | 1.0dB/km |
Mechanical characteristics | |
Maximum installation tension | 600lb |
Maximum installation tension | 2700N |
Max. Load. Long Term (lbs) | 180.0lb |
Max. Load. Long Term | 800.0N |
Usage characteristics | |
Minimum Bending Radius - Install | 6.9in |
Minimum Bend Radius - Install | 17.4cm |
Minimum Bending Radius - LongTerm | 4.6in |
Minimum Bending Radius - LongTerm | 11.6cm |
RoHS compliant | Yes |
Recommended operating temperature range | -60 .. 70°C |
Ambient installation temperature, range | -30 .. 60°C |
Recommended storage temperature range | -40 .. 75°C |
Field of application | Outdoor |
Docs and info
Sheath Colors
Fiber Type |
Core |
ISO-TIA |
Effective Modal |
Overfilled Launch |
Attenuation |
Attenuation |
Attenuation |
Sheath Color |
AB |
8.3 |
OS2 |
NS |
NS |
NS |
0.3 dB/km |
0.2 dB/km |
Black |
AB |
8.3 |
OS2 |
NS |
NS |
NS |
0.4 dB/km |
0.3 dB/km |
Black |
CB |
62.5 |
OM1 |
200 MHz-km |
200 MHz-km |
3.5 dB/km |
1.0 dB/km |
NS |
Black |
EB |
50 |
OM3 |
2000 MHz-km |
1500 MHz-km |
3.0 dB/km |
1.0 dB/km |
NS |
Black |
FB |
50 |
OM4 |
4700 MHz-km |
3500 MHz-km |
3.0 dB/km |
1.0 dB/km |
NS |
Black |
XB |
50 |
OM4+ |
4900 MHz-km |
3675 MHz-km |
3.0 dB/km |
1.0 dB/km |
NS |
Black |
NS = Not Specified |
-
Manufacturing Release
IMPORTANT NOTICE: This product specification is provided for informational purposes only in order to illustrate typical product constructions, applications and/or methods of installation. Because conditions of actual installation and use are unique and will vary, Berk-Tek makes no representation or warranty as to the reliability, accuracy or completeness of this data, even if Berk-Tek is aware of the product's intended use or purpose. Furthermore, this data does not constitute, nor should it be regarded or relied upon, as professional engineering advice. Installation of product should only be done by qualified personnel and in conformance with all safety, electrical and other applicable codes, standards, rules or regulations. Appropriate and correct product selection, installation and use, and compliance with all such codes, standards, rules and regulations, is a customer/end-user responsibility. Product specifications, standards, programs or services are subject to improvement or changes without notice. Berk-Tek accepts no liability for typographical errors, technical inaccuracies, omissions or misuse of the information contained herein. Changes will be periodically made to address any such issues.