Description
Standards
National : ANSI/TIA-568.3-DDescription
The assembly consists of a Micro Data Center indoor cable terminated with LC connectors on both sides. This pre-terminated solution allows for very fast installation in data centers.
Features
- Small cable diameter
- Small bending radius
- Less space required for cabling in a data center
- Less influence on airflow
- Less weight in cable trays
- Flexible fan-out to install in patch panels
- 0.3 dB insertion loss
- Plenum flame rating
- User configurable length
Construction
The assembly has a dual fan-out design. This design is optimized for installation and fixation into the UHD Nexans adaptor modules.
The connectors on the individual fibers have colored boots for identification in compliance with the TIA/EIA standard. In manufacturing, a fiber pair flip has been implemented to obtain transmit-receive polarity in the channel. When installing the connectors inside the Nexans modules, just match the colored boots with the colors on the integrated strip inside the module and the polarity will be correct.
The LC-LC trunks have an integrated cable gland that fits into the Nexans ENSPACE patch panel slots, allowing the cable to be quickly and easily secured.
Performance
The ENSPACE LC-LC trunks are fully terminated and tested in a quality assured factory environment. The test results are delivered in the box with the assembly.
Other Options Available
- Zero Halogen flame rating
- 0.15 dB insertion loss
- Custom labels
- Light weight pulling eye
Characteristics
Construction characteristics | |
---|---|
Sheath colour | Aqua |
Fiber optic type | OM3 50/125 |
Dimensional characteristics | |
Cable diameter (Nominal) | 0.28in |
Nominal outer diameter | 7.0mm |
Number of optical fibres | 72 |
Mechanical characteristics | |
2 Impacts per TIA/EIA FOTP-41 | 5.88N.m |
Crush resistance per TIA/EIA FOTP-41 | 110N/cm |
Usage characteristics | |
Minimum Bend Radius - Installed | 70mm |
Recommended operating temperature range | 0 .. 75°C |
Recommended storage temperature range | -40 .. 75°C |
Docs and info
Jacket Colors - NDS
Fiber |
Core |
ISO-TIA |
Effective Modal |
Overfilled Launch |
Attenuation |
Attenuation |
Attenuation |
Jacket Color |
4 |
8.3 |
OS2 |
NS |
NS |
NS |
0.4 dB/km |
0.3 dB/km |
Yellow |
5 |
50 |
OM3 |
2000 MHz-km |
1500 MHz-km |
3.0 dB/km |
1.0 dB/km |
NS |
Aqua |
7 |
50 |
OM4 |
4700 MHz-km |
3500 MHz-km |
3.0 dB/km |
1.0 dB/km |
NS |
Aqua |
8 |
50 |
OM4+ |
4900 MHz-km |
3675 MHz-km |
2.7 dB/km |
1.0 dB/km |
NS |
Violet |
9 |
50 |
OM5 |
4700 MHz-km |
3500 MHz-km |
3.0 dB/km |
1.0 dB/km |
NS |
Lime Green |
NS = Not Specified |
-
Trunk Drawing 72 FIber
-
Manufacturing Release - NDS
IMPORTANT NOTICE: This product specification is provided for informational purposes only in order to illustrate typical product constructions, applications and/or methods of installation. Because conditions of actual installation and use are unique and will vary, Nexans makes no representation or warranty as to the reliability, accuracy or completeness of this data, even if Nexans is aware of the product's intended use or purpose. Furthermore, this data does not constitute, nor should it be regarded or relied upon, as professional engineering advice. Installation of product should only be done by qualified personnel and in conformance with all safety, electrical and other applicable codes, standards, rules or regulations. Appropriate and correct product selection, installation and use, and compliance with all such codes, standards, rules and regulations, is a customer/end-user responsibility. Product specifications, standards, programs or services are subject to improvement or changes without notice. Nexans accepts no liability for typographical errors, technical inaccuracies, omissions or misuse of the information contained herein. Changes will be periodically made to address any such issues.